SKADI Toyota MR-S 1ZZ-FE 16 Row Oil Cooler Kit + Brackets, 99/10->07/07

<section class='product-specific-copy skadi-copy'><p>A legacy complete vehicle-specific 16-row full-flow sandwich-plate engine-oil-cooler kit for Toyota MR-S 1ZZ-FE, catalogued for 99/10->07/07. It includes the SKADI cooler, hoses, fittings, oil-system hardware and vehicle-specific cooler mounting brackets listed in the confirmed component record.</p><h3>Key features</h3><ul><li>16-row SKADI AN-10 oil cooler</li><li> Toyota MR-S 1ZZ-FE application</li><li> Full-flow sandwich-plate arrangement</li><li> Standard-filter version</li><li> Vehicle-specific cooler mounting brackets included</li><li> 99/10->07/07 catalogue coverage</li></ul><h3>Construction and design</h3><p>The confirmed component record uses 8 distinct BOM lines, combining the 16-row cooler with the specified hose, fittings, engine-side take-off hardware and vehicle-specific cooler mounting hardware. This SKU is a legacy SKO-3 exception created before complete kits moved to the SKO-5 prefix.</p><h3>Cooling performance</h3><p>The compact 16-row core adds dedicated heat-exchanger area while keeping the package manageable where installation space is limited. This non-thermostatic configuration routes oil through the cooler whenever the engine is running.</p><h3>Fitment notes</h3><p>Catalogued for Toyota MR-S 1ZZ-FE, covering 99/10->07/07. Confirm the exact engine, oil-filter interface, sealing face, centre-spigot engagement and available installation clearance before fitting. Vehicle-specific cooler mounting brackets are included; confirm the intended mounting points, trial-fit the assembly and plan the hose route before cutting and assembling the hose. The oil-filter thread is not yet confirmed; verify the exact engine-side interface before ordering.</p><p><strong>Important:</strong> Check every BOM item against the supplied kit before installation. Keep hoses clear of exhaust heat, sharp edges and moving parts; prime the oil circuit, pressure-test it, verify oil pressure and check for leaks before driving. Monitor oil temperature and avoid over-cooling during cold or low-load use. Mount the cooler securely using the supplied vehicle-specific brackets and check clearance to bodywork, airflow paths and surrounding components before use.</p><p>Complete 16-row cooling for Toyota MR-S 1ZZ-FE, with the recorded AN-10 circuit hardware and vehicle-specific cooler mounting brackets included. Run hard, run cool.</p><h3>What's in the box?</h3><ul><li>2 × SKADI 4 x M6 16mm UHL flanged bolts w. flanged nuts (SKO-019)</li><li> 1 × SKADI 4m AN-10 hose, nylon with blue fleck (SKO-001)</li><li> 2 × SKADI AN-10 45 Degree Fitting Black (SKO-007)</li><li> 2 × SKADI AN-10 Straight Fitting Black (SKO-006)</li><li> 1 × Kit component (SKB-001)</li><li> 1 × SKADI Oil filter sandwich plate w. AN-10 ports (SKO-015)</li><li> 2 × SKADI AN-10 90 Degree Fitting Black (SKO-008)</li><li> 1 × SKADI Mocal Style Oil Cooler 16-rows, black with SKADI Logo, AN-10 (SKO-003)</li></ul></section>